News

What is the custom fastener process? Engineering samples in as fast as 1 day and max 1 week; batch lead time depends on tooling. Understand drawing require

Bolts on engines, battery packs, and motors loosen under transverse vibration. Based on GB/T 3098.9-2020 and wedge washer technology, compare prevailing-to

8.8 class bolts creep and relax above 300 C long-term. Based on GB/T 3098.8-2010 appendix A and GB/T 3098.24, select materials from -200 C to +800 C across

What do 8.8, 10.9, 12.9 on the bolt head mean? Based on GB/T 3098.1-2010 section 5, the left number is tensile strength, the right number is yield ratio, p

Do not scrap the part when a threaded hole strips. Compare oversize re-tap, wire thread insert, slotted insert, and other repair methods based on GB/T 2442

Why does the same torque produce different clamp loads? Based on GB/T 16823.3 / ISO 16047, understand the torque coefficient K, thread friction, bearing su

Are aluminum bolts strong enough? Compare ZT68 (630 MPa) and 6056 (~420 MPa) high-strength aluminum bolts against steel on strength, weight savings, engage

Based on GB/T 10125-2012 / ISO 9227, understand the three salt spray methods (NSS, AASS, CASS), their solution, temperature, and settlement parameters, tes

How to choose between cold heading and CNC machining? Using a real 6061 aluminum lifting sleeve case, compare cost, takt, material utilization, strength, a

M0.6 to M2 micro screws look tiny but cost several times more than ordinary M4/M6 screws. Break down the cost across precision, tooling, material, inspecti