Blog

Only about 10% of torque becomes clamp force. GB/T 16823.3 separates thread friction μth, bearing friction μb and torque coefficient K, then feeds real K b

Bolt fatigue is decided by stress amplitude, not mean stress. Read clam-shell fracture surfaces, tune the load-distribution factor Φ, hold preload, and use

High-strength bolts can brittle-fracture hours or days after clamping with no overload. Trace hydrogen to plating/pickling, set the HRC32 susceptibility li

Countersunk tooling screws need head angle matched exactly to the insert countersink. Read angle/head-diameter/recess-depth from the catalog, and cover bal

Tooling screws clamp carbide inserts at up to 20000rpm. Choose Torx Plus drive, fine-pitch 4h/6g thread, class 12.9 HRC40-48 alloy steel, TiN/TiAlN/DLC coa

Mini screws run on micron-level consistency. Thread precision per GB/T 197, SWRCH/SUS/titanium materials, cold heading to thread rolling to heat treatment,

M0.6-M1.4 micro screws: effective thread length just over 1mm, micron-level tolerance, tape-and-reel SMT fit. Compare cold heading, thread rolling, materia

Rivet nuts form in 3 seconds by pulling a bulb to clamp thin sheet. Choose hand/pneumatic/electric-hydraulic tools, set stroke and pull force, follow six s

Choose blind rivet nuts by head/body style, thread size, material and clamping range per GB/T 17880. Match anti-rotation, sealing and galvanic corrosion to

Thread loosening follows Junker transverse slip and self-rotation, plus creep/relaxation preload decay. Compare friction, mechanical and chemical anti-loos